1973-79 Pontiac Firebird Trans AM GenV Drop Base Shaker Assembly Washable Element
Description
1973-79 PONTIAC FIREBIRD TRANS AM DROP BASE SHAKER ASSEMBLY W/ 3" CONE SHAPED WASHABLE ELEMENT- FOR USE WITH EDELBROCK RPM INTAKE (326-455)
WILL ONLY WORK ON PONTIAC ENGINE WITH PONTIAC 400/455 SHAKER **NOT 301**. GUARANTEED WILL NOT WORK ON 403 OLDS or SBC THAT CAME IN SOME PONTIAC CARS. THOSE SHAKERS HAVE DIFFERENT HEIGHTS AND OFFSETS
1973-79 TA 326-455 Pontiac Drop Base Shaker Assembly w/ 3" Cone Shaped Washable Element Included
Must use Pontiac 400/455 Shaker and not Oldsmobile (Must cut shaker for air inlet)
It can be made to fit with an air cleaner spacer if used with a stock height manifold. Can work with the Torker II but it is a slightly different angle. Can work with shorter intakes with spacers
*May not work on the early 1977 shaker that was only 2"*
*Will not work on a 74 GTO*
*Will not work on a 70-72 Trans AM with electric actuator flapper doors.
*Not for KRE High Port Heads
-
Dimensions:
•Overall Height: 4 3/4"
•Diameter: 16 5/8”
•Filter Diameter: 10 1/4" top 13 3/4” bottom
•Carb Flange to Top:2 3/4”
For use w/ Edel Perf RPM or Northwind NW-4150 Intakes and the following carbs/efi:
EFI Systems:
•FAST EZ 1.0, 2.0
•Holley Sniper
•FiTech
Modification of the drop base may be necessary at the fuel inlet fitting. 1/4", 1/2", 45/90 degree hose fitting or banjo fitting may also be needed
Holley Carbs:
•Non-Electric Choke Carbs- Will work
•Electric Choke Carbs- Will work
QJET Carbs:
•Non-Electric Choke Carbs- Will work
•Electric Choke Carbs- Will work
For some XP carbs the radius inside the drop base may need to be "massaged" to clear the float bowl
Edelbrock Carbs:
•Non-Electric Choke Carbs- Will work with a Banjo Fitting
•Electric Choke Carbs- Will not work
We process most orders within 24 hours. We have the processing time set at 3 days, but rarely does it take that long.
-
1st Gen 1967, 1968, 1969 Firebird Trans Am Camaro
2nd Gen 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981 Firebird Trans Am Camaro
3rd Gen 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992 Firebird Trans Am Camaro
4th Gen 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 Firebird Trans Am Camaro
*** These will work with most any car where the seats have 4 bolts to the floor. They are very Versatile and will work in a variety of installations.
